Silicon nitride ceramic ring

‌ Silicon nitride ceramic ball ‌ is a kind of precision ceramics sintered at high temperature in non-oxidizing atmosphere, with high strength, high wear resistance, high temperature, corrosion resistance, acid and alkali resistance and other excellent properties. Its density is 3.20g/cm³, about 1/3 of the weight of bearing steel, small centrifugal force when rotating, suitable for high-speed operation. In addition, silicon nitride ceramic balls are also self-lubricating, suitable for non-lubricating media and high pollution environment ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

silicon nitride ceramic substrate is a kind of high performance and high stability ceramic substrate material, mainly composed of silicon nitride powder synthesized by silicon and nitrogen elements adding a small amount of oxides and rare earth sintered ‌‌. It has the advantages of high hardness, high strength, low thermal expansion coefficient, low creep at high temperature, good oxidation resistance, high thermal corrosion performance, low friction coefficient, etc. ‌ is one of the best structural ceramic materials with comprehensive performance MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic bolt ‌ is a kind of bolt made of silicon nitride (Si3N4) material, which has excellent high temperature resistance, corrosion resistance and mechanical properties. Silicon nitride ceramic bolts perform well at high temperatures, maintain high strength at 1200 ° C, and only break down at 1900 ° C ‌. In addition, it also has good chemical resistance, able to resist almost all inorganic acids (except hydrofluoric acid) and less than 30% caustic soda solution ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic rods perform well in high temperature environments, have good heat shock resistance, and can maintain high strength and impact resistance at high temperatures. Its decomposition temperature is 1800℃ in the air, up to 1850℃ in nitrogen, and it will not break after being heated in cold water at 1000℃ ‌. Silicon nitride ceramics have high thermal conductivity and low coefficient of thermal expansion, which makes them have excellent heat shock resistance at high temperature ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic tubes can maintain stable mechanical properties at high temperatures up to 1400 ° C. Compared with traditional ceramics, silicon nitride ceramics show higher strength and toughness, and can withstand greater impact and loads ‌. MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

The Mohs hardness of silicon nitride ceramics is usually above 9, which makes it excellent in wear resistance and scratch resistance ‌, enough to keep its physical and chemical properties stable at extreme high temperatures, melting point of more than 2700℃, can still maintain good mechanical strength and dimensional stability at high temperatures. MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

The Mohs hardness of silicon nitride ceramics is usually above 9, which makes it excellent in wear resistance and scratch resistance ‌, enough to keep its physical and chemical properties stable at extreme high temperatures, melting point of more than 2700℃, can still maintain good mechanical strength and dimensional stability at high temperatures ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

The Mohs hardness of silicon nitride ceramics is usually above 9, which makes it excellent in wear resistance and scratch resistance ‌, enough to keep its physical and chemical properties stable at extreme high temperatures, melting point of more than 2700℃, can still maintain good mechanical strength and dimensional stability at high temperatures ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic is a kind of made of silicon nitride (Si3N4) material, which has excellent high temperature resistance, corrosion resistance and mechanical properties. Silicon nitride ceramic perform well at high temperatures, maintain high strength at 1200 ° C, and only break down at 1900 ° C ‌. In addition, it also has good chemical resistance, able to resist almost all inorganic acids (except hydrofluoric acid) and less than 30% caustic soda solution ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic tubes can maintain stable mechanical properties at high temperatures up to 1400 ° C. Compared with traditional ceramics, silicon nitride ceramics show higher strength and toughness, and can withstand greater impact and loads ‌. MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Technial Ceramics are used to make the welding guide pins, which are used for projection welding and resistance welding in automotive industry. Ceramic pins are electrical insulated and high thermal shock resistant. Besides, they can be used up to 1,200 degree C. So they offer much longer service life and higher economic efficiency. MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic piston ‌ is a kind of high performance material, with high bulk density, high thermal shock resistance, high hardness and high temperature resistance. These characteristics make silicon nitride ceramic pistons perform well in extreme environments and are widely used in various industrial fields. MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic is a kind of made of silicon nitride (Si3N4) material, which has excellent high temperature resistance, corrosion resistance and mechanical properties. Silicon nitride ceramic perform well at high temperatures, maintain high strength at 1200 ° C, and only break down at 1900 ° C ‌. In addition, it also has good chemical resistance, able to resist almost all inorganic acids (except hydrofluoric acid) and less than 30% caustic soda solution ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic rings are usually manufactured by ‌ hot press sintering process ‌. This process sintering silicon nitride powder under high temperature and high pressure conditions significantly improves the density and mechanical properties of the material. By optimizing the hot press sintering process, the overall performance of silicon nitride ceramic rings can be further improved, making it more suitable for harsh industrial needs ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic bolt ‌ is a kind of bolt made of silicon nitride (Si3N4) material, which has excellent high temperature resistance, corrosion resistance and mechanical properties. Silicon nitride ceramic bolts perform well at high temperatures, maintain high strength at 1200 ° C, and only break down at 1900 ° C ‌. In addition, it also has good chemical resistance, able to resist almost all inorganic acids (except hydrofluoric acid) and less than 30% caustic soda solution ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

Silicon nitride ceramic structure is a kind of ceramic material composed of silicon and nitrogen elements, chemical formula Si3N4, with unique crystal structure and excellent physical and chemical properties ‌‌. Its basic structural unit is the tetrahedron [SiN4], the silicon atom is located in the center of the tetrahedron, surrounded by four nitrogen atoms, forming the form of one atom for every three tetrahedra, forming a continuous and sturdy network in three-dimensional space MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650

The Mohs hardness of silicon nitride ceramics is usually above 9, which makes it excellent in wear resistance and scratch resistance ‌, enough to keep its physical and chemical properties stable at extreme high temperatures, melting point of more than 2700℃, can still maintain good mechanical strength and dimensional stability at high temperatures ‌ MATERIAL : Si3N4 DENSITY  : 2.8 COLOR  : Black / Blue / White HRDNESS(Mohs scale) : 9 MAX WORKING TEMPERATURE : 1650